INSTRUCTIONS FOR USE Pro-Ject Amp Box
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors ! Make all connections whilst the amplifier is disconnected from the power supply. Connection to the preamplifier The Input sockets marked Left / Right are for connecting the cables from your pre-amp or AV processor.
Technical specifications Pro-Ject Amp Box Power output: Frequency response: Channel separation: Noise floor: THD: Gain: Pre in: Input sensitivity: Input impedance: Speaker connectors: Trigger: Trigger in and out: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 2 x 20W/30W at 8ohms/4ohms (both channels driven) 5Hz - 20kHz (+ 0dB, - 0,5dB) > 40dB at 20kHz > -100dB (A weighted) < 0,05% at 10W 22dB 1 pair RCA/Phono sockets 1V 47kohms 4mm ∅ banana plugs, spades connector
