Owner manual

Front panel controls

Switching on and off

The switch on the left hand side of the front panel turns the unit on and off. The blue LED above the ON/OFF

switch shows that the unit is switched on.

Selecting playback mode

MODE on the remote control toggles between the sampling frequencies 44,1 and 88,2kHz (upsampling) and

Sonic2 playback mode (sampling frequency 176,4kHz).

To store

Sonic2 (I

S) ore upsampling to 88,2kHz as the default playback mode, press OK. The selected

playback mode will be shown in the display.

To be able to use the

Sonic2

playback mode, the output

Out Sonic

AND

the input

Clock In

have to

be connected to the corresponding connectors on the Pro-Ject DAC Box RS or on the Pre Box RS

Digital.

If one of the connections is missing or faulty,

Sonic2

playback mode cannot be selected

Inserting a disc

Switch the unit on. Remove the lid and the magnetic clamp. Insert the disc, with the label side facing upwards.

Place the magnetic clamp on the CD and put the lid on. The display shows:

Loading, don`t open ... . After

loading, the display shows the total number of tracks on the disc and the total duration of the disc.

Display shows

when lid is removed, no disc is inserted, disc is not supported or damaged

Display shows

after switching on and inserting the lid

Not using the magnetic clamp may cause unexpected behaviour!

Changing the colour of the display

Back Play view will change the colour of the characters displayed and the background colour of the display.

OK confirms the selection. To access that function, playback must on.