INSTRUCTIONS FOR USE Pro-Ject DAC Box DS
Dear music lover, thank you for purchasing a Pro-Ject Audio Systems DAC Box DS. In order to achieve maximum performance and reliability you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. ! Important notice. Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
The DAC supports PCM (LPCM) format only. The DAC does not work with audio formats like DTS™ or Dolby® Digital. If the DAC is used with a TV satellite/cable receiver or a TV sets with an integrated satellite/cable receiver, make sure that in the set-up menu of your receiver/TV set, the format of the digital signal, relayed to the digital output used is set to PCM.
24Bit/192kHz driver (Windows® operating systems only) * For Windows® operating systems a 24Bit/192kHz driver has to be installed. Insert the included CD into the drive of you PC and follow the instructions. After installing the 24Bit/192kHz driver, some setting have to be done. For example - Windows 7® operating system: Control Panel Hardware and Sound Sound Playback: select Project DAC DS USB 2.
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible distributor in your country. Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use.
