Owner manual

Technical specifications Pro-Ject DAC Box E

Line-level output: 1 pair RCA/phono sockets

Output voltage: 0,7Vrms

Digital outputs: 1 x coaxial (S/PDIF),

1 x optical (TOSlink

)

D/A converter: Cirrus Logic CS4344. 24Bit/192kHz

Supported audio format: PCM (LPCM). No support for multi channel formats like Dolby

AC-3 or DTS

™

Sampling rates

Optical and coaxial input: 44,1kHz, 48kHz, 96kHz and 192kHz (coaxial)

Outboard power supply: 18V/500mA DC

Power consumption: 200mA DC, <1W in standby

Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mm

Weight: 250g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the

unit be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

TOSlink

is a registered trademark of Toshiba corporation. Dolby

is a registered trademarks of Dolby

Laboratories. DTS

™

is a registered trademark of DTS, Inc..