INSTRUCTIONS FOR USE Pro-Ject Juke Box
11 11 16 6 30 0 6a 15 5 17 1 3 9a 2 4 7 5 8 18 9 21 20 20a 23 IN MP3 IN 1 IN 2 SELECTOR 3a 22 10 11 12 14a IN MP3 2 IN 1 13 13a IN 2 16V 14 21V= © Audio Trade GmbH · Pro-Ject Juke Box / Ortofon OM 5E · Revision 19.8.09/1.9.
PRO-JECT JUKE BOX Controls, features and connections 1 2 3 4 5 6 7 8/18 9 10 11 12 13 14 15 16 17 20 21 22 23 Motor Stepped drive pulley Drive belt * 3a Hook * Hub Platter with felt mat * Tonearm counterweight * 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid * Lid hinges Hinge fasteners Power supply socket 16V 13a Power supply socket 21V Speaker connector 14a Line level inputs Anti-skating weight adjustment scale Anti-skating weight * Anti-s
Cartridge downforce adjustment The counterweight (6) supplied is suitable for cartridges weighing between 3,5 - 5,5g. Alternative counterweights for cartridges weighing between 6 - 9g or 1,5 - 3g are available as accessory parts. Adjust the downforce prior to installing the anti-skating weight. Pushing carefully, turn the counterweight (6) onto the rear end of the tonearm tube (9), so that the downforce scale (6a) shows towards the front of the player.
Remote control 1 ON/OFF ON/OFF 0_ CH+ VOL not available and 0 VOL + adjust the sound volume VOL+ VOL- 0_ CH CH- 0 CH + and select the inputs. The selected input is shown respectively by the lit LED. Switching on and off Pressing the power switch (20) switches the unit on and off. The red LED on the front panel shows that the unit is powered on. Front panel controls IN MP3 IN 1 IN 2 SELECTOR Input selector After the unit is powered on it is instantly ready to play vinyl records.
Maintenance and cleaning Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn't turn although the unit is switched on: The unit is not connected to the mains power supply.
Accessories Lid Tomearm transport look Tonearm counterweight Platter 8 © Audio Trade GmbH · Pro-Ject Juke Box / Ortofon OM 5E · Revision 19.8.09/1.9.