INSTRUCTIONS FOR USE Pro-Ject MaiA Pro-Ject MaiA Pre
Dear music lover, thank you for purchasing a Pro-Ject Audio Systems´ amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. ! Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Connection to the speakers (Maia only) The output terminals accept loudspeaker cables terminated with 4mm Banana plugs, spades connectors or naked wire. Phono input Connect the tonearm signal lead to the In 1 Phono of the amplifier. The earthing wire may be connected to the screw terminal if you encounter hum problems when using the turntable. Line inputs Line level sources such as CD player, radio or TV can be connected to the input sockets marked In 2,In3 or In 4.
Remote control 1 ON/OFF ON/OFF 0 CH+ 0 0 VOL + VOL VOL+ VOL- turns the unit on or back into standby (long press), mute (short) and 0 adjust the sound volume CH + CH and select the inputs CH- VOL+ and CH+ confirm Bluetooth pairing VOL- and CH- cancel Bluetooth pairing Front panel controls To switch on from standby or to standby The push button on the left side of the front panel turns the unit on or back into standby.
! Older devices may request a pairing code. Enter "0000" and confirm. No more confirmation on MaiA is then needed. Bluetooth pairing with Apple devices Tap on Settings, tap on Bluetooth, turn on Bluetooth. Your device will automatically start searching for available devices. Tap on "MaiA" and confirm by pressing ► (pair) button on MaiA(alternatively CH+ or VOL+ button on remote control) when the blue LED of input 9 is blinking. Bluetooth pairing with Windows smartphones Open Settings and tap on Bluetooth.
Technical specifications Pro-Ject MaiA Power output : Frequency response : Channel separation : Noise floor : THD : Gain : Line level inputs : Line input sensitivity : Line input impedance : Phono input : Phono input sensitivity : Phono input impedance : Phono input gain : S/PDIF coaxial input : S/PDIF optical input : USB input : USB data transfer : Digital to Analogue converter : Variable line level output : Bluetooth version: Bluetooth music receiver codec : Bluetooth range : Speakers connectors: Headphon
Technical specifications Pro-Ject MaiA Pre Variable line level output : Headphone output : Output voltage : Output impedance : Frequency response : Noise floor : THD : Gain : Line level inputs : Line input sensitivity : Line input impedance : Phono input : Phono input sensitivity : Phono input impedance : Phono input gain : S/PDIF coaxial input : S/PDIF optical input : USB input : USB data transfer : Digital to Analogue converter : Bluetooth music receiver codec : Bluetooth range : Outboard power supply : P