Instruction Manual

Dear music lover,

thank you for purchasing a Pro-Ject Audio Systems Power Box RS Phono.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the power supply.

Never handle the device while your hands are wet or damp.

Avoid letting liquids enter the device. Never place any item containing liquid, such as a flower vase

on or near the device. Never spill any liquid on the device. Never place any naked flame sources, such

as lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a

bathtub, sink, swimming pool or any other similar conditions.

Connecting the unit

Connect the Power Box RS Phono with Phono Box RS with supplied cable. Then connect supplied power

supply to the Power Input 20V DC socket and to the mains. The original power supply of Phono Box RS is no

longer required.

Power Box RS Phono is designed only for Pro-Ject Phono Box RS.

This unit contains a Li-ion batteries which last longer if not stored discharged. As the battery self-

discharges over time, its voltage gradually diminishes. Therefore we strongly recommend to fully

charge batteries after purchase of the unit and then at least once per 6 month regardless the unit was

in use or not.