INSTRUCTIONS FOR USE Pro-Ject Pre Box SE
Dear music lover, thank you for purchasing a PRO-JECT AUDIO preamplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors Trigger 1 Sub 2 3 Out 4 Pre Out ! Make all connections whilst the preamplifier is disconnected from the power supply. ! Take care to connect the left and right channels correctly.
Remote control 1 ON/OFF ON/OFF short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute CH+ 0_ and 0_ and VOL VOL+ VOL- CH- CH 0 adjust the sound volume 0 select the inputs VOL + CH + Front panel controls Pre Box SE A - + C D B Stand-By A on the front turns the unit on or back into standby. The display shows STANDBY when the unit is in standby.
Replacing batteries Proceed as follows: • • Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! • Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores.