INSTRUCTIONS FOR USE Pro-Ject Head Box II
Dear music lover, thank you for purchasing a PRO-JECT AUDIO headphone amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connection to the amplifier (recorder) Connect the TAPE OUT RCA/phono sockets from your amplifier to the In RCA/phono sockets of the headphone amplifier.
Potential incorrect use and fault conditions No signal on one or both channels: No connection between headphone and headphone amplifier ore amplifier. This could be due to a faulty plug, broken wire or solder joint or simply loose plug/socket connection. Headphone does not work: Headphone volume control is at minimum. Amplifier Tape-Monitor circuit is not activated.
