INSTRUCTIONS FOR USE Pro-Ject Record Box USB
Dear music lover, thank you for purchasing a Pro-Ject Audio Systems phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Connection to the amplifier Connect the OUTPUT of the phono amplifier to a line input (such as AUX, CD, Tuner, Tape or Video) on your amplifier. Mains power connection Connect the low voltage plug from the power supply to the INPUT DC socket of the phono amplifier before connecting the power supply to the mains. Connecting to a Computer Connect the USB-output of the unit to a free USB-socket on your computer and turn it on/make sure it is powered on.
Potential incorrect use and fault conditions No signal on one or both channels: No connection between player and phono amplifier ore amplifier. This could be due to a faulty plug, broken wire or solder joint or simply loose plug/socket connection. Strong hum: No earth connection from cartridge or arm or arm cable to phono amplifier, or earth loop.
