INSTRUCTIONS FOR USE Pro-Ject Set “Micro-Hifi-System”
Dear music lover, thank you for purchasing a Pro-Ject “Micro-Hifi-System”-Set. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the units or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Connecting receiver, docking station and CD player Connect, using the supplied interconnect cables, the sockets IN1 on the receiver to the sockets OUT on the CD Box S. The sockets OUT of the Dock Box S Fi have to be connected to the sockets IN2 on the receiver. Take care to connect the left and right channels correctly. The right channel is usually marked red, ! the left channel black or white. Antenna input Connects any antenna cable with a co-axial DIN-plug / US-model F-plug.
Connection to a TV-set or a beamer Connect the S-VIDEO socket to a s-video input of your TV-set or beamer. Fitting and adjustment of the iPod® cradle Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet. Now place your iPod® on the Dock Box contacts. Move the cradle so that it supports the iPod® and tighten the screw. Suitable for iPods® with 30-pole connector only.
Remote control - Dock Box S Fi Blanked out buttons do not carry a function ! ON/OFF MENU ENTER 7 REPEAT 8 9 SHUF To switch on from standby or to standby 0 0 7 8 ON/OFF turns the iPod® into standby. To switch on from standby press any key (except ON/OFF). 9 Start / Pause 0 8 starts and pauses playback Stepping between tracks, reverse and forward scanning 9 7 skips to the previous track.
Remote control - Receiver Box S To switch on from standby or to standby INPUT ON/OFF CH+ TUNE 0 ON/OFF short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute TUNE VOL- OK VOL+ M1 CH- M2 Volume _ VOL 0 M4 M5 M6 M7 M8 0 VOL + adjust the sound volume Selecting an input 0 INPUT M3 and selects the inputs and tuner mode in turns Selecting the tuning mode 0 OK Pressing (min.
Auto store function 0 M4 Long press 0 M1 starts, confirms the auto store function. 0 M1 clears the complete memory while 0 M2 storing. keeps stations with good signal strength in the memory and overwrites stations with insufficient signal level while storing. Front panel controls - Receiver Box S Receiver Box S To switch on from standby or to standby - Receiver Box S The push button on the left hand side will toggle the receiver between its fully operational status and standby.
Setting the colour of the des display 0 decreases 0 decreases M3 M4 0 0 increases red 0 increases green M6 M7 0 M8 M5 decreases increases blue The changes will be shown in the first line of the display. After leaving the set-op menu, the changes will become valid for the complete display. 0 M1 loads the factory settings for brightness and colour. To leave the set-up menu press 0 OK . Display - tuner mode A B C 87.
Remote control - CD Box S To switch on from standby or to standby +10 ON/OFF STOP 1 ON/OFF turns the unit on or back into standby Volume control 0_ VOL- 0 VOL+ VOL 1 2 3 Stop 5 4 STOP 6 or 0 VOL + adjust the sound volume of your Pro-Ject Audio amplifier stops playback Play / Pause 7 9 8 8 starts and pauses playback Selecting tracks 1 - 9 and +10 accesses a specific track directly and start playback. For example, to play track 19, press 9 +10 , 1 and 9 .
Front panel controls - CD Box S CD Box S To switch on from standby or to standby - CD Box S A short press of the push button on the left hand side switches the player to its fully operational status. To return to standby, press the button for more than four seconds. The display shows STANDBY when the unit is in standby. To switch to standby, playback must be stopped. Inserting and ejecting a disc Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards.
Control it The six push buttons correspond to each unit. Press the appropriate button to select the unit you want to control, then press the required function buttons. Blanked out buttons do not carry a function, for the unit selected.
Pre amplifier, integrated amplifier, Juke Box and Juke Box Esprit press Amp turns the unit on or back into standby. - + VOL and adjust the sound volume of the pre amplifier, integrated amplifier, receiver or Juke Box and Juke Box Esprit. activates and deactivates mute *. CH + - VOL + and - select the inputs in turns. + CH - Amp * Pre Box SE, Pre Box DS and Stereo Box DS only 1 © Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.
Receiver and Tuner press 2/M2 1/M1 4/M4 5/M5 7/M7 8/M8 3/M3 6/M6 Receiver short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute *. - + VOL and adjust the sound volume of the receiver, pre amplifier, integrated amplifier, or Juke Box and Juke Box Esprit. INPUT selects the inputs and tuner mode in turns *. OK Pressing (min.
CD-player press CD turns the unit on or back into standby. 2/M2 1/M1 starts and pauses playback. 3/M3 stops playback. 5/M5 4/M4 7/M7 8/M8 6/M6 9/M9 1/M1 9/M9 playback. accesses a specific track directly and start Higher track numbers - for example, to play track 19, 0 +5/M10 press +5/M10 , 1/M1 and 9/M9 . - + VOL and adjust the sound volume of the pre amplifier, integrated amplifier, receiver or Juke Box and Juke Box Esprit. To step between tracks press or .
Docking station press Dock turns the iPod®/iPhone® into standby. To switch on from standby press any key (except ON/OFF). Dock Box Fi and Dock Box Vi only. Turns the unit on or back into standby. activates and deactivates mute *. + - VOL and docking station *. adjust the sound volume of the starts and pauses playback. REP EAT E FL UF SH Skips to the previous track skips to the next track. . restarts the current track in playback mode.
Media Box press Media turns the unit on or back into standby. USBISD selects between card reader and USB. starts and pauses playback. Restarts playback from the same position after stopping. skips to the next track. restarts the current track in playback mode. -5 +5/M10 button for reverse scanning, Press and hold the or the button to start forward scanning. REP EAT Pressing the button repeatedly selects the repeat modes in turns.
Stream Box press Stream turns the unit on or back into standby. @ ABC DEF 1/M1 2/M2 3/M3 GHI JKL MNO 4/M4 5/M5 6/M6 PQRS TUV WXY 7/M7 8/M8 9/M9 activates and deactivates mute. starts and pauses playback. stops playback. skips to the next track, picture or internet radio station. skips to the previous track, picture or internet radio station. 0 REP ▲,▼,◄ and ► navigate the cursor. EAT E FL UF SH OK OK Calls up a submenu. Highlights and confirms a highlighted menu item.
Replacing batteries (Receiver, CD Box S and Dock Box S Fi) Proceed as follows: Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Replacing batteries (Control it) Proceed as follows: Unlock and remove the battery case cover Replace the batteries.
Technical specifications Pro-Ject CD Box S Supports: Frequency response: Noise floor: THD: Line-level output: Output voltage: Digital output: D/A converter: CD, CD-R, CD-RW and Hybrid-SACD 20Hz - 20kHz /-0,3dB 96dB/1V 0,01% 1 pair RCA /phono sockets 1Vrms 1 x co-axial (S/PDIF) Texas Instruments TLV320DAC23 24Bit/96kHz, 8-times oversampling Outboard power supply: 9V/2.000mA DC; suitable for your country's mains supply Power consumption: 300 - 1.