Instruction Manual

© Audio Trade GmbH · Pro-Ject Micro-Hifi-System-Set · Revision 2013.1.15
1
Replacing batteries (Receiver, CD Box S and Dock Box S Fi)
Proceed as follows:
 Unlock and slide open the battery case cover
 Replace the battery.
Make sure the battery is the right way round !
 Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Replacing batteries (Control it)
Proceed as follows:
 Unlock and remove the battery case cover
 Replace the batteries.
Make sure the batteries are the right way round !
 Refit the battery case cover
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject Receiver Box S
Power output: 2 x 25W/30W at 8 ohms/4 ohms (both channels driven)
Tuning range FM-band: 87,5 - 108MHz (50kHz steps)
Programmable presets: 99
THD tuner: 0,05% / ∆f 75kHz and f mod 1kHz
Stereo separation: 30dB / ∆f 75kHz and f mod 1kHz
Sensitivity: 7dB/V mono, 17dB/V stereo /75 ohms
Frequency response: 20Hz - 20kHz (±0,2dB)
Channel separation: >40dB at 20kHz
Noise floor: >-100dB (A weighted)
THD amplifier: <0,05% at 10W
Gain: 22dB
Line-level inputs: 1 pair RCA/phono sockets, 3-pole 3,5mm co-axial jack
Input impedance: 20kohms
Antenna input: 1 x co-axial DIN-socket (75 ohms) / US-model F-socket
Outboard power supply: 20V/3A DC (peak 7A DC), suitable for your country's mains supply
Power consumption: 3A DC, <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (122)mm
Weight: 670g without power supply
Technical specifications Pro-Ject Dock Box S Fi
Frequency response: 20Hz - 20kHz
Line-level output: 1 pair RCA/phono sockets
Output impedance: 15 ohms
Output voltage: 1Vrms
USB-output: 5-pole mini-B jack
USB-signal: digital serial data protocol USB 1.1
Operating systems: Windows XP
®
, Windows VISTA
®
, Windows 7
®
, Windows 8
®
, Mac OS
Video output: S-video socket
Outboard power supply: 18V/500mA DC, suitable for your country's mains supply
Power consumption: 300mA DC max.. Power consumption is not constant.
It depends on the charging needs of the battery. <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm - height plus height of iPod or iPhone
Weight: 585g without power supply