INSTRUCTIONS FOR USE Pro-Ject Speed Box DS
Dear music lover, thank you for purchasing a PRO-JECT AUDIO Speed Box DS. * The unit permits electronic speed change of your Pro-Ject record player between 33 and 45 r.p.m. and also permits the replay of shellac records by allowing ** 78 r.p.m. with an appropriate pulley and cartridge. The replay speed can be increased and decreased in twenty steps of 0,1 r.p.m. In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Stand By Press and hold the button St.By to put the Speed Box DS into stand by. Pressing the button St.By will switch on the Speed Box DS from stand by. Switching on and off Pressing the power switch of your Pro-Ject turntable alternately starts or stops the motor. Speed selection 33/45 r.p.m. The belt must be on the smaller (50Hz models) larger (60Hz models) diameter part of the motor pulley. Press the speed change button 33/45 to switch between 33 and 45 r.p.m..
Technical specifications Pro-Ject Speed Box DS Nominal speeds: * 33 and 45 r.p.m. ** Optional 78 r.p.m. Quartz oscillator: Speed stability ± 0,001% Pitch control: ±20 steps/0,1 r.p.m. *** Length power cable: approximately 40cm Turntable connection: 16V/AC 190mA max. (3W power consumption max.) 120V model only: 120V/AC 25mA max. (3W power consumption max.) 230V model only: 230V/AC 13mA max. (3W power consumption max.) Outboard power supply: 18V/1.
