INSTRUCTIONS FOR USE Pro-Ject Speed Box S
Dear music lover, thank you for purchasing a PRO-JECT AUDIO Speed Box. * The unit permits electronic speed change of your Pro-Ject record player between 33 and 45 r.p.m. and also permits the replay of shellac records by allowing ** 78 r.p.m. with an appropriate pulley and cartridge. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice.
To switch on from standby or to standby The push button on the left hand side will toggle the Speed Box between its fully operational status and standby. The blue LED above the stand-by push button shows that the unit is switched on. Speed selection 33/45 r.p.m. Speed Box S The belt must be on the smaller (50Hz models) larger (60Hz models) diameter part of the motor pulley. Press the button 33 45 to switch between 33 and 45 r.p.m.. The selected speed is shown respectively by the lit LED.
Technical specifications Pro-Ject Speed Box S Nominal speeds: Quartz oscillator: *** Length power cable: Turntable connection: Outboard power supply: Dimensions W x H x D (D with sockets): Weight: * 33 and 45 r.p.m. ** Optional 78 r.p.m. Speed stability +/- 0,001% approximately 40cm 16V/AC 190mA max. (3W power consumption max.