INSTRUCTIONS FOR USE Pro-Ject Tuner Box S
Dear music lover, thank you for purchasing a PRO-JECT AUDIO FM-tuner. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors FM Ant. 75 Ohm In Trigger Out Pro-Ject Audio Systems, Vienna, Austria ! Make all connections whilst the tuner is disconnected from the power supply. Take care to connect the left and right channels correctly.
Remote control Stand-By INPUT ON/OFF CH+ TUNE short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute TUNE VOL- OK VOL+ M1 CH- M2 M3 0 ON/OFF M5 M4 Volume _ VOL 0 and 0 no function INPUT 0 VOL + adjust the sound volume Selecting the tuning mode 0 OK M6 M8 M7 Pressing (min.
Auto store function 0 M4 Long press 0 M1 starts, confirms the auto store function. 0 M1 clears the complete memory while 0 M2 storing. keeps stations with good signal strength in the memory and overwrites stations with insufficient signal level while storing. Front panel controls Tuner Box S To switch on from standby or to standby The push button on the left hand side will toggle the tuner between its fully operational status and standby.
Display A B C 87.90 MANUAL A Signal strength meter B Stereo reception C Fine tuning meter D Tuning mode. E Tuned frequency F Mono reception toggles between the tuning modes E D Manual program search Press (approx. 3 seconds) repeatedly until the display shows MANUAL. increases the reception frequency in 50kHz steps. decreases the reception frequency in 50kHz steps.
Technical specifications Pro-Ject Tuner Box S Tuning range FM-band: Programmable presets: Frequency response: S/N ratio: THD: Stereo separation: Sensitivity: Antenna input: Line-level output: Trigger: Trigger in and out: Output voltage: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 87,5 - 108MHz (50kHz steps) 99 20Hz - 20kHz (±1dB) 50dB 0,05% / ∆f 75kHz and f mod 1kHz 30dB / ∆f 75kHz and f mod 1kHz 7dB/V mono, 17dB/V stereo /75 ohms 1 x co-axial DIN-socket (75 o
