Manual

Technical specifications Pro-Ject Tuner Box

Tuning range FM-band: 87,5 - 108,5MHz (50kHz steps)

Programmable presets: 8

Frequency response: 20Hz - 20kHz (±1dB)

S/N ratio: 50dB

THD: 0,05% / ∆f 75kHz and f mod 1kHz

Stereo separation: 30dB / ∆f 75kHz and f mod 1kHz

Sensitivity: 7dB/µV mono, 17dB/µV stereo /75 ohms

Antenna input: 1 x co-axial DIN-socket (75 ohms) / US-model F-socket

Line-level output: 1 pair RCA/Phono sockets

Trigger: 12V DC switching voltage

Trigger in and out: 2-pole co-axial ∅ 2,5mm jack

Output voltage: 0,775Vrms

Outboard power supply: 16V/200mA AC, suitable for your country's mains supply

Power consumption: 16V/70mA AC

Dimensions W x H x D (D with sockets): 103 x 36 x 103 (112)mm

Weight: 565g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for

further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible

distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Audio Trade GmbH

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.