User Manual

ManualsBrandsPro-Ject Audio ManualsAudioPro-Ject The Classic Evo Turntable

1

2

3

4

5

6

7

8

9

Table Of Contents

© Pro-Ject Audio Systems · Pro-Ject The Classic Evo · Revision 2019.03.26

7

SETUP AND INSTALLATION

1. FEET ASSEMBLY

Remove the three feet (15 –accessories list) from the grey foam insert. Carefully turn the turntable and screw

the feet into the thread insert from the bottom of the turntable. Balance the turntable by using a spirit level

before next steps.

2. TRANSPORT SCREWS

Remove the three transport screws (7) from the upper part of the chassis before installing the sub-platter (6),

the drive belt

(5) and the platter (1).