Owner's Manual

© Pro
-Ject Audio Systems · Pro-Ject Pre Box S2 Digital · Revision 2017.09.04
2
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems preamplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the us
er, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times.
Never handle the device or the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the dev
ice or the power supply.
Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool o
r any other similar conditions.
Connectors
Make all connections whilst the preamplifier is ddisconnected from the power supply
TTake care to connect the left and right channels correctly. The right channel is usually marked red,
thhe left channel black or white.
Mains power connection
The unit offers 2 possibilties:
1. USB input is not used: Connect the low voltage plug from the power supply to the micro-USB socket P
Power
5V DC
before connecting the power supply to the mains.
2. USB input is in use: Unit can be powered directly from computer via USB input. In this case is highly
recommended to disconnect Power 5V DC cable from the unit - power disturbances from two power supplies
could affect sound performance.
Outputs
The unit is equipped by a pair of analogue output RCA sockets on the back panel and a headphone output
connector (Jack 6,3mm) on the front panel. Connect the O
Output
RCA socket to a line input on your
amplifier.