Instructions for Use

The push button on the front enables or disables the backsided USB A and 2.5mm outputs. The LED above

the push button lights up when the outputs are enabled.

"Charging"

- is illuminated when batteries are charged.

- is blinking when battery status is low (20%) - charging is not in progress. If the charging is not started

manualy by disabling the output sockets it will start charging automatically when battery status is below

10%

"Mains" green LED is illuminated when the unit is connected to the mains.

Technical specifications Pro-Ject Accu Box S2

Output voltage / current: 1x 18V/1A (2.5mm)

1x 5V/1A (USB A)

Capacity: 2600mAh (Li-Ion batteries)

Charging time: 3 hours (outputs disabled)

External battery charger: 21V output

Dimensions W x H x D: 103 x 37 x 106 mm

Weight: 545 g

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit

be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons, release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.