User Manual

Table Of Contents

13. MOUNTING THE PLATTER, DRIVE BELT AND RECORD CLAMP

With the turntable mounted on the wall, install the platter

(3)

and the drive belt

(4)

as shown in following

illustration.

After the placing the record on the platter, it is necessary to tighten the screw-able record

clamp (6) onto the platter spindle.

Technical specifications Pro-Ject VT-E R / Pro-Ject 8,6’’ EV tonearm

Nominal speeds 33/45 r.p.m.

Speed variance 33: ±0,80 % 45: ±0,70 %

Wow and flutter 33: ±0,29 % 45: ±0,27 %

Signal to noise -65dB

Effective tonearm mass 8g

Effective tonearm length 8,6 " (218,5mm)

Overhang 22mm

Power consumption 4,5W (5W max)/ >0,5W standby mode

Outboard power supply 15V/ 0,8 A DC, universal power supply

Dimensions (W x H x D) 430 x 345 x 245mm

Weight 2,8 kg

Technical specifications MM-Cartridge Ortofon OM 5E

Frequency range

20-25.000Hz

Channel separation

22dB/1kHz

Output voltage

4mV

Recommended load impedance

47kohms/amplifier connection – MM-input

Compliance/stylus type

20µm/mN – elliptical

Recommended tracking force

17,5mN

Weight