User Manual

Technical specifications Pro-Ject Power Box RS Amp

Input voltage: AC 230V/50Hz IEC C15 connector (120V/60Hz US version)

Output voltage: two outputs by 2 x 48V / 2.5A DC each

Filtration capacity: 40.000 µF

Output voltage ripple: 7mV peak to peak

Dimensions W x H x D: 201 x 72 x 195mm

Weight: 4,8kg

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer

for further advice. Only if the problem cannot be resolved there, the unit should be sent to the

responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these

instructions for use. Modification or

changes to any part of the product by unauthorized persons

release the manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going

to press. The manufacturer reserves the right to

make

changes to the technical specification

without prior notice as deemed necessary to

uphold the ongoing process of technical

development.