INSTRUCTIONS FOR USE Pro-Ject Debut III/Phono SB
14 11 16 6 0 30 1 11 17 5 6a 15 3 22 2 1 4 7 5 8 18 9 21 20 33 Speed45/78 33 SPEED 45/78 Speed Box SPEED BOX 24 25 21 17 25 9a 3a 23 10 11 13 2 12 © Audio Trade GmbH · Pro-Ject Debut III / Phono SB / Ortofon OM 5E · Revision 1.3.08/1.5.
PRO-JECT DEBUT III/PHONO SB Controls, features and connections 1 2 3 4 5 6 7 8/18 9 10 11 12 13 14 15 16 17 20 21 22 23 24 25 Motor transportation screw (marked red) Stepped drive pulley Drive belt * 3a Hook * Hub Platter with felt mat * Tonearm counterweight * 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid * Lid hinges Hinge fasteners Power supply socket Signal output cable Anti-skating weight adjustment scale Anti-skating weight * Anti-ska
Cartridge downforce adjustment The counterweight (6) supplied is suitable for cartridges weighing between 3,5 - 5,5g. Alternative counterweights for cartridges weighing between 6 - 9g or 1,5 - 3g are available as accessory parts. Adjust the downforce prior to installing the anti-skating weight. Pushing carefully, turn the counterweight (6) onto the rear end of the tonearm tube (9), and so that the downforce scale (6a) shows towards the front of the player.
Switching on and off Pressing the power switch (20) alternately starts or stops the motor. Changing replay speed Press the speed change button (24) to switch between 33 and 45 r.p.m.. The selected speed is shown respectively by the lit green LED (33 r.p.m.) or red LED (45 or 78 r.p.m.). To replay records at 78 r.p.m. perform the following steps: Remove the platter (5) and using the tool (3a) from the accessory kit. Fit the belt (3) around the larger diameter step of the pulley (2).
Technical specifications PRO-JECT DEBUT III/PHONO SB * Electronic speed change Speed variance Wow and flutter Signal to noise Downforce range Effective tonearm length Overhang Power consumption Outboard power supply Dimensions (W x H x D) Weight * 33,33/* 45,11 and 78 r.p.m.
Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer. PRO-JECT is a Registered Trademark of H. Lichtenegger. The information was correct at the time of going to press.