INSTRUCTIONS FOR USE Pro-Ject Phono Box E BT5
Dear music lover, thank you for purchasing this Pro-Ject Audio phono amplifier with Bluetooth® transmitter. In order to achieve maximum performance and reliability you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse Important notice Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Line Out acts as a direct bypass when Line in input is selected. (Active also without power supply) Alternatively, the built-in Bluetooth transmitter allows to relay signal from inputs (Phono or Line) to any BT receivers such as Pro-Ject MaiA S2 (S3) or BT Box E (S2, S2 HD) or directly to Bluetooth speakers or headphones. Transmitter connects to the receiver with strongest signal automatically.
Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or change to any part of the product by unauthorized persons; release the manufacturer from any liability over and above the lawful rights of the customer. Copyright, trademarks Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger. This guide was produced by: Pro-Ject Audio Systems Copyright © 2021. All rights reserved.
Declaration of Conformity We, Canor spol. s r.o.
