INSTRUCTIONS FOR USE Pro-Ject RPM 3 Carbon
© Pro-Ject Audio Systems · Pro-Ject RPM 3 Carbon / Ortofon 2M SILVER · Revision 2016.01.
Controls, features and connections 1/11 Power switch, motor unit with stepped drive pulley 2 Drive belt * 3 Platter 4 Tonearm counterweight * 5 Tonearm lift lever 6/16 Tonearm rest and removable transport lock 7 Tonearm tube 8 Power supply socket 9 Phono output sockets and earth connection 10 Magnetic anti-skating mechanism 12 Magnetic anti-skating scale 13 Magnetic anti-skating adjustment mechanism 14 Headshell with finger lift Connection cable (not shown)* Power supply (not shown)
Pro-Ject RPM 3 Carbon Dear music lover, thank you for purchasing a Pro-Ject Audio Systems´ record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. ! Important notice. The record player is supplied without cartridge or with a factory fitted and adjusted cartridge Ortofon 2M SILVER.
Cartridge downforce adjustment The counterweight (4) supplied is suitable for cartridges weighing between 5 - 9g (counterweight no. 83). Adjust the downforce prior to setting the anti-skating force. Place counterweight (4) halfway along the counterweight support rod at rear of arm, being sure to have the securing screw uppermost. With the power off, and the platter static, place the stylus pressure gauge onto the platter.
Connection to the amplifier The record player has gold plated female RCA phono sockets (9) for connection to the amplifier using the supplied interconnect cables. Use the Phono input (sometimes labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge used. Line inputs (such as CD, Tuner, Tape or Video) are not suitable. Take care to connect the left and right channels correctly.
Maintenance and cleaning Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth. Never use a dry cloth because this will create static electricity which attracts more dust! Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn't turn although the unit is switched on: The unit is not connected to the mains power supply.
© Pro-Ject Audio Systems · Pro-Ject RPM 3 Carbon / Ortofon 2M SILVER · Revision 2016.01.
