Owner's Manual

Step 3:

Put the anti-skating sliding mechanism on the end of the anti-skating support rod. The anti-skating thread

should fit into the groove in the tonearm.

Be careful when handing the anti-skating thread in order to avoid damaging it.

Step 5:

Anti-skating force adjustment:

Adjust the anti-skating force by positioning the weight on the appropriate groove of the anti-skating sliding

mechanism. Anti-skating downforce should be adjusted in correspondence with the tonearm downforce as

follows:

Tonearm downforce: Anti-skating groove:

Lower than 13 mN or 1.3 grams 1st groove from bearing

13–18 mN or 1.3–1.8 grams 2ndgroove from bearing

18–25 mN or 1.8–2.5 grams 3rd groove from bearing