User Manual

ManualsBrandsPro-Ject ManualsElectronicsR (White) Wireless Turntable, White (high Gloss)

Table Of Contents

MOUNTING THE PLATTER, DRIVE BELT AND RECORD CLAMP

With the turntable mounted on the wall, install the platter

(3)

and the drive belt

(4)

as shown in following

illustration.

After the placing the record on the platter, it is necessary to tighten the screw-able record

clamp (6) onto the platter spindle.

CARTRIDGE, VERTICAL TRACKING FORCE (VTF)

The turntable is supplied with fitted cartridge Ortofon OM 5E. The counterweight

(7)

supplied is suitable only

for Ortofon OM cartridges. Cartridge downforce is pre-adjusted from the factory.

Please note: It is not recommended to change the cartridge or vertical tracking force without prior

consultation with your dealer.

CONNECTION TO THE AMPLIFIER

The record player has two possible outputs –

Line OUT

(14)

with integrated preamplifier

and

Phono OUT (15)

for connection to the preamplifier. If you choose Phono OUT

(15),

than use the

Phono

input (sometimes

labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and

amplification for the type of cartridge used. If you choose Line OUT

(14),

than use the

Line

inputs (like CD,

Tuner, Tape or Video).

Take care about connecting the left and right channel correctly. The

RIGHT CHANNEL

is usually marked

RED

, the

LEFT CHANNEL BLACK

WHITE

. Check the manual of your amplifier for relevant information. An

earthing wire may be connected to the screw terminal between the sockets if you encounter humming

problems.

For detailed product information regarding Pro-Ject Audio Systems interconnect cables, phono amplifiers

and stereo power amplifiers, please visit our website: