User Manual

Table Of Contents

BLUETOOTH PAIRING

The record player has Bluetooth output and transmits the signal automatically when is turned ON by using

Bluetooth switch

(17).

It is paired automatically with any device with Bluetooth receiver (such as Pro-Ject MaiA, MaiA DS, Bluetooth Box

s and Bluetooth Box E).

For pairing with other devices and portable speakers use the manual of the given product.

For restart of the Bluetooth transmitter, please turn OFF and ON the Bluetooth module by using the switch.

Restart is needed only when there is a change of the Bluetooth receiver.

For detailed product information regarding Pro-Ject Audio Systems Bluetooth audio receivers, please visit our

website:

www.project-audio.com

MAINS POWER CONNECTION

The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before

connecting to ensure compliance with the mains rating in your house.

Connect the low voltage plug from the power supply to the socket

(19)

on the rear of the record

player before connecting the power supply to the mains.

SWITCHING ON AND OFF

Pressing the power switch

(1)

alternately starts or stops the motor.

CHANGING REPLAY SPEED

To play records at

45 r.p.m.

, put the drive belt

(4)

over the larger diameter part of the motor pulley

(2)

. To

revert to

33 r.p.m.

repeat the proceedings using the smaller step on the pulley.

MAINTENANCE AND CLEANING

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic

cloth. Never use a dry cloth because this will create static electricity which attracts even more dust! Antistatic

cleaning fluids are available at specialized stores but must be applied sparingly to avoid damage to rubber

parts. It is recommended to fit the needle cover before cleaning or maintenance to avoid damage.

If the player is not used over a long period of time, the drive belt should be removed to prevent unequal

stretching.

Always disconnect the record player from the mains power supply as a precaution before maintenance!