Installation Guide
SAFETY AND GENERAL
INFORMATION
Save these instructions. For your safety, read,
understand, and follow the information provided
with and on this lift. The owner and/or operator shall
have an understanding of the device, its operating
characteristics and safety operating instructions before
operating the equipment. The owner and/or operator
shall be aware that use and repair of this product may
require special skills and knowledge. Instructions and
safety information shall be read to and discussed with
the operator in the operator’s native language, making
sure that the operator comprehends their contents,
before use of this equipment is authorized. If any doubt
exists as to the safe and proper use of this device,
remove from service immediately.
Inspect before each use. Do not use if abnormal
conditions such as cracked welds, damaged, loose or
missing parts are noted. Any equipment that appears
damaged in any way, is found to be worn, or operates
abnormally shall be removed from service until repaired.
If the equipment has been or is suspected to have been
subjected to an abnormal load or shock, immediately
discontinue use until inspected by a factory authorized
repair facility (contact distributor or manufacturer for list
of authorized repair facilities). It is recommended that
an annual inspection be made by an authorized repair
facility. Labels and Operator’s Manuals are available
from the manufacturer.
PRODUCT DESCRIPTION
The Pro-Lift Lawn Mower Lift is specically designed to
lift and support up to rated capacity loads consisting of
a single Riding Lawn Mower whose frame is compatible
with the lifting members of the lift. This lift is NOT suit-
able for lifting, leveling and/or positioning cars, trucks,
SUV’s or conveyances other than those specically
listed and approved above. This lift is NOT suitable for
lifting, leveling and/or positioning houses, construction
trailers or dwellings in general. This product is designed
to be permanently assembled. The Hydraulic unit is not
to be used independently of the lift.
2
PREPARATION
Inspect lift before each use:
1. Before using this product, read the owner’s manual
completely and familiarize yourself thoroughly with
the product and the hazards associated with its
improper use.
2. Verify that the product and the application are com-
patible. If in doubt, contact Pro-Lift Customer Service.
3. Ensure that rollers and lift arms move freely. Check
for and tighten any loose assemblies.
4. Owner and operators of this device shall be aware
that no serviceable or replaceable parts are available
for this device other than those parts listed on page
5. Do not attempt to weld, rivet or otherwise repair
this device.
•
Study, understand and follow all instructions
before operating this device.
•
Use of this product is limited to lifting, holding and
lowering loads consisting of a single mower
compatible with the lift platform. Incompatibility is
evident when the loaded mower wobbles, appears
unstable, and/or does not securely engage the
wheel baskets.
•
Restraining an incompatible load will not make the
load secure and may cause unexpected loss of
load.
•
Do not exceed rated capacity.
•
Use only on hard, level surfaces.
•
Center load on lift platform.
•
Immediately after lifting load, ensure lift mechani-
cal load holding device is engaged.
•
Never work on, under or around a load that is not
stable or secure.
•
Keep operator’s and bystander’s head, hands and
feet away from lift arms when raising and lowering.
•
No alterations shall be made to this product.
•
Only attachments, restraints or adapters supplied
by the manufacturer shall be used.
•
Failure to heed these messages may result in
personal injury and/or property damage.
! WARNING
SPECIFICATIONS
Base Size (L x W) Lift Surface Capacity Compatible Wheel Track Lift Height
40” x 15-7/8” Wheel Bracket 500 lbs. 19-1/4” to 42-1/2” outside span 26-1/2”