Warranty

ManualsBrandsPro-Lift ManualsAir Compressors, Tools & Accessories12-Volt 130 PSI Portable Air Compressor Pump Digital Tire Inflator

5 in 1 Air Compressor

Operating Instructions and Parts Manual

SFA Companies, Inc.

10939 N. Pomona Ave.

Kansas City, MO 64153

Tel (816) 891-6390, Fax (816) 891-6599

Printed in China

W-1806-M0_072015

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey

all safety messages that follow this symbol to avoid possible injury or property damage

Model W-1806

Summary of content (4 pages)

PAGE 1
5 in 1 Air Compressor Operating Instructions and Parts Manual Model W-1806 ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or property damage SFA Companies, Inc. 10939 N. Pomona Ave.
PAGE 2
! WARNING • Study, understand and follow all instructions before operating this device. • When using this air compressor, basic safety precautions should always be followed to reduce risk of fire or electrical shock. • Do not exceed rated pressure of the item being inflated. • Do not leave device operating and unattended. • If DC plug fuse is blown, only replace with fuse of identical rating. • This device contains a DC motor and components which may arc during normal operation.
PAGE 3
B. FOR USE WITH LOW PRESSURE INFLATABLES Figure 2 1. To inflate air mattresses, beach balls, life jackets, etc., remove low pressure inflator and low pressure inflator adapters from storage compartment. 2. Connect low pressure inflator adapters onto low pressure inflator/deflator (labeled “INFLATION POINT”) on side of compressor, and use to connect plastic air hose. 3. Insert power cord plug-in into the detached low pressure inflator. 4. Plug the compressor into the DC 12V outlet.
PAGE 4
E. REPLACING THE FUSE (13A 6mm dia. x 30mm glass tube current fuse) 1. Unscrew the plastic 12V DC plug cap. 2. Gently remove 12V fuse and replace with fuse of same rating and size. 3. Place fuse properly in position to allow installation of plastic cap. 4. Reinstall plastic 12V DC plug cap. higher rating. No user replaceable parts exist for this item, refer any repairs to qualified personnel only. 3. Do not overheat the compressor, monitor cycle times (compressor’s on and off periods).