The InfoCenter Version 2.
INFOCENTER V2.02 Table of Contents I. Set-up Overview……………………………………………….Pg. 2 II. Set-up Procedures……………………………………………Pg. 3 Time/Parameter Setting……………………………………Pg. 3 Edit Page………………………………………………….…Pg. 5 Edit Script……………………………………………………Pg. 7 Setting Up Display Task/Schedule……………………..…Pg. 8 Default Script………………………………………………..Pg. 10 III. Special Characters……………………………………..…....Pg. 11 IV. Shortcut Hot Keys……………………………………………Pg. 13 V. Contact Information………………………………………..…Pg.
INFOCENTER V2.02 2 Set-Up OVERVIEW Once the InfoCenter is powered (plugged-in), it will start to run. By default, it will display and fill the screen with 1’s. At the same time, the InfoCenter will check to see if there’s any scripts or schedules been set within its memory.
INFOCENTER V2.02 3 Set-Up Procedures Set Time and Configuration Press the key to start The InfoCenter’s Time/Date setting. The screen will display: Setup Configurations F4 Press ENTER ↑↓ Press [Enter] or the Down arrow ↓ to go the next screen. The next menu allows you to Set the Time: Set Time [HH:MM:SS] 00:00:00 Press ← or → ↓ Use the number on the keyboard and enter the hour, minute, and second of the current time.
INFOCENTER V2.02 4 [Space] to change the country setting. Press [ESC] to return to the main menu or Down arrow to access the next menu. Select the communication parameters, the screen will display: Set COMM Use MODEM: no Baud Rate: 4800 Press ←, →, SPACE ↑↓ The following baud rates are available: 1200, 2400, 4800, 9600, 14400 and 19200. Press Left or Right arrow key to move the cursor. Press p q or to change. Press [Enter] or Down arrow for the next menu.
INFOCENTER V2.02 5 Select the serial address, the screen will display: Set ADDR Set serial address >001 Number 001-255 ↑ Please input number 001 to 255 to identify the signs in network. Use number keys 0 to 9 input the number directly, or to change the number by plus or minus one. After all is set, press [ESC] to exit and return to run mode. Note: You might have to press [ESC] multiple times until you have returned to the main menu.
INFOCENTER V2.02 6 The menu below allows you to set the alignment (Center, Left or Right) of your text: Set Align Center, Left or Right Your choice: c Press C, L or R ↑↓ Press C to select align center, L to select align left or R to select align right. After selecting the alignment you want, press the Down arrow key to access the Set Font menu. Set Font Blink: no Fat-Face: no Press B or F ↑↓ Press B to toggle the Blink feature of the font, and press F to toggle the Fat-Face feature of the font.
INFOCENTER V2.02 7 Edit Script The ‘script’ is a program that instructs The InfoCenter how the page(s) will be displayed. Press key to start editing a script, the last edited script will be displayed on the screen. You should see the following screen: (If you don’t see the main Script menu, press again.) Page no:?? 00 Pause: 000 Method: Curtain Press ↑ or ↓ ▼ The first line shows the page number to be displayed.
INFOCENTER V2.02 8 To check what is the current page being display, press either [ESC] or key to display the current page. Press key and navigate back to the “Delete” menu with the arrow key to delete the current page. Press the Down arrow ↓ will display the menu that allows you to Insert a new page into the current script: Insert Inset one page Page no: ?? Number 00-99 ↑ Input page number ranging from 00 to 99 and then press e, the given page will be inserted to the script.
INFOCENTER V2.02 Input script number ranging from 0 to 9, press [Enter] or Down arrow to access the next menu. Set the Start Time of the task, the screen will display: From Time [HH:MM] 00:00 Press ← or → ↑↓ Use the number key to enter a specific hour and minute for The InfoCenter to start running the script. Press Left or Right key to move the cursor, input the start time of the task and then press [Enter] or Down arrow for the next menu.
INFOCENTER V2.02 10 Weekly 80 91 92 93 94 95 86 0=Sun, 1=Mon, etc Press ← or → ↑ Press Left or Right key to move the cursor, press to change the selected status. You can also use keys 0 to 6 to toggle the selected state directly. - 8 means unselected, and 9 means selected. - 0 to 6 indicate Sunday to Saturday. NOTE: - When a task runs on certain weekdays, go to Weekly, set the From Date to 1-1-1980 and To Date to 31-12-2099 first.
INFOCENTER V2.02 11 SPECIAL CHARACTERS In order to insert special characters in your pages, first please make sure that you have selected the correct character settings in the SET UP menu. To insert a special character, please hold the 'a' key inserted and simultaneously press the accompanying key according to the below mentioned table.
INFOCENTER V2.
INFOCENTER V2.02 13 Shortcut/Hot Keys When you are using a computer to program The InfoCenter, the following Shortcut Keys are available for your convenience. These Shortcut Keys can be accessed while editing a page.
INFOCENTER V2.02 14 Contact Information Pro-Lite, Inc. 3505 Cadillac Ave., Bldg. D Costa Mesa, California 92626 Technical Support http://www.pro-lite.
