User's Manual

58
[Classification]
IP QoS -- Enable/disable the IP QoS function.
Source IP -- The IP address of the traffic source.
Source Netmask --The source IP netmask. This field is required if the source IP has been
entered.
Source Port
-- The source port of the selected protocol. You cannot configure this field
without entering the protocol first.
Destination IP -- The IP address of the traffic destination.
Destination Netmask -- The destination IP netmask. This field is required if the destination IP
has been entered.
Destination Port -- The destination port of the selected protocol. You cannot configure this
field without entering the protocol first.
Protocol -- The selections are TCP, UDP, ICMP and the blank for none. This field is required if
the source port or destination port has been entered.
Physical Port -- The incoming ports. The selections include LAN ports, wireless port, and the
blank for not applicable.