User's Manual

46
4.6.3.2 MAC Filtering
The MAC filtering feature allows you to define rules to allow or deny frames through the device
based on source MAC address, destination MAC address, and traffic direction.
Outgoing Default Action -- Specify the default action on the LAN to WAN bridging/forwarding
path.
Incoming Default Action -- Specify the default action on the WAN to LAN bridging/forwarding
path.
Apply Changes -- Click to save the setting of default actions to the configuration.
Direction -- Traffic bridging/forwarding direction.
Rule Action -- Deny or allow traffic when matching this rule.
Source MAC Address -- The source MAC address. It must be xxxxxxxxxxxx format. Blanks
can be used in the MAC address space and are considered as don’t care.
Destination MAC Address -- The destination MAC address. It must be xxxxxxxxxxxx format.
Blanks can be used in the MAC address space and are considered as don’t care.
Delete Selected -- Delete selected filtering rules from the filter table. You can click the
checkbox at the Select column to select the filtering rule.
Delete All -- Delete all filtering rules from the filter table.