User's Manual

47
4.6.3.3 Port Forwarding
Firewall keeps unwanted traffic from the Internet away from your LAN computers. Add a Port
Forwarding entry will create a tunnel through your firewall so that the computers on the
Internet can communicate to one of the computers on your LAN on a single port.
Port Forwarding -- Check this item to enable or disable the port-forwarding feature.
Protocol -- There are 3 options available: TCP, UDP and Both.
Local IP Address -- IP address of your local server that will be accessed by Internet.
Local Port -- The destination port number that is made open for this application on the
LAN-side.
Remote IP Address -- The source IP address from which the incoming traffic is allowed.
Leave blank for all.
Public Port -- The destination port number that is made open for this application on the
WAN-side
Interface -- Select the WAN interface on which the port-forwarding rule is to be applied.
Apply Changes -- Click to save the rule entry to the configuration.
Delete Selected -- Delete the selected port forwarding rules from the forwarding table. You
can click the checkbox at the Select column to select the forwarding rule.
Delete All -- Delete all forwarding rules from the forwarding table.