User's Manual

73
[Connection Request]
User Name -- Key in the User name for ADSL router.
Password -- Key in the password for ADSL router.
Path -- The path for connection request. Default is “/tr069”.
Port -- The port for connection request. Default is “7547”.
[Debug]
ACS Certificates CPE -- The ACS URL is used by the CPE for validating the certificate from
the ACS when using certificate-based authentication.
Show Message -- Enable/Disable Show message feature.
CPE Sends GetRPC -- Enable/Disable CPE sends GetRPC function.
Skip MReboot -- Enable/Disable Skip MRboot feature.
Delay -- Enable/Disable Delay feature.
Auto-Execution -- Enable/Disable Auto-Execution feature.
CT Inform Extension -- Enable/Disable Ct Inform Execution feature.
[Certificate Management]
CPE Certificate Password -- The password is for CPE certificate.
CPE Certificate -- Browse CPE certificate which is provided by ISP server. The CPE may use
online certificate enrollment with the CA associated with the ACS. The CPE must be provided
with the information needed to contact this CA.
CA Certificate -- Browse CA certificate which is provided by ISP server.
4.10 Statistics
The DSL device shows the different layer of network statistics information
4.10.1 Interface
You can view statistics on the processing of IP packets on the networking interfaces. You will
not typically need to view this data, but you may find it helpful when working with your ISP to
diagnose network and Internet data transmission problems.
To display updated statistics showing any new data since you opened this page, click
Refresh.