User's Manual

61
IP Pass through -- The available interfaces are listed. You have to select one for advanced
configuration.
Lease Time -- The Lease Time is the amount of time that a network user is allowed to
maintain a network connection to the device using the current IP address.
Allow LAN access – Check this option to enable the LAN access
4.8 Diagnostic
The DSL device supports some useful diagnostic tools.
4.8.1 Ping
Once you have your DSL device configured, it is a good idea to make sure you can ping the
network. A ping command sends a message to the host you specify. If the host receives the
message, it sends messages in reply. To use it, you must know the IP address of the host you
are trying to communicate with and enter the IP address in the Host Address field. Click Go! To
start the ping command, the ping result will then be shown in this page