User's Manual

7
register for this service with a Dynamic DNS client.
 DHCP Support
DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP
configuration at start-up from a centralized DHCP server. The ADSL router has built-in DHCP
server capability enabled by default. It can assign IP addresses, an IP default gateway and
DNS servers to DHCP clients. It can also act as a surrogate DHCP server (DHCP Relay)
where it relays IP address assignment from the actual real DHCP server to the clients.
 SNMP (Simple Network Management Protocol) Support
It’s an easy way to remote control the router via SNMP.
 Multiple PVC (Permanent Virtual Circuits) Support
z Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.
z ATM Forum UNI 3.1/4.0 PVC
z Support up to 8PVCs.
2. Hardware Installation ___
2.1 System Requirements
z Pentium III 266 MHz processor or higher
z 128 MB RAM minimum
z 20 MB of free disk space minimum
z RJ-45 Ethernet Port
z CD-ROM drive
2.2 Package Contents
z ADSL Ethernet Router
z RJ-45 Ethernet cable
z RJ-11 Phone cable
z Power Adapter
z Software driver CD
2.3 Front Panel Indicators and Description
Front panel of ADSL router has LED indicators to display router’s operating status.