User's Manual

Encryption: There have 4 encryption options – WEP, WAP (TKIP), WPA2(AES), and WPA2

Mixed.

WPA authentication mode: WPA operates in either WPA-PSK mode (Pre-Shared Key or

WPA-Personal) or WPA-802.1x mode (RADIUS or WPA-Enterprise). In the Personal mode, a

pre-shared key or passphrase is used for authentication. In the Enterprise mode, which is

more difficult to configure, the 802.1 x RADIUS servers and an Extensible Authentication

Protocol (EAP) are used for authentication.

Pre-Shared Key Format: select Passphrase mode or Hex mode for the Pre-Shared Key.

Pre-Shared Key: Enter the Pre-Shared via using the Passphrase mode or Hex mode.

Authentication RADIUS server: fill the port, IP address and the password of the RADIUS

server.

4.4.4 Access Control

If you know choose “Allowed Listed” from Wireless Access Control mode, only chose clients

whose wireless MAC address are in the access control list will be able to connect to your

Access Point. When “Deny Listed” is selected, these wireless clients on the list will not be

able to connect the AP.