User's Manual

4.4.5 WPS

This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this

feature could let your wireless client automatically synchronize its setting and connect to the

Access Point in a minute without any hassle.

In PIN method (PIN-Personal Identification Number), When your 11n router acts as a

Registrar, your must enter “Self-PIN Number” on WPS config section, this Enrollee PIN code

should be provided by the Enrollee. If your 11n router acts as a Enrollee, in WPS config

section, the “Regenerate PIN” will automatically generate for you. The purpose of PIN code is

to provide the security key to Registrar (AP/Server). Therefore, WPS (Wi-Fi Protected Setup)

can be established completely.

In PBC Method (PBC-Push Button Communication), while the AP router acts as Registrar or

Enrollee, and click “Start PBC” button, the WPS (Wi-Fi Protected Setup) will establish the

connection automatically.

4.4.6 MBSSID

This page allows you to setup wireless multiple BSSID configuration. The Base Service Set

Identifier (BSSID) is typically the MAC address if the radio. This Wireless LAN ADSL2+ Router

also supports multiple BSSIDs (MBSSID) on a single AP.