User's Manual

32
3.7 WPS
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simply the
security setup and management of Wi-Fi Networks.
WPS Site Survey: Display the information of surrounding APs with WPS IE from last scan
result. List information’s include SSID, BSSID, Channel, ID (Device Password ID),
Authentication Type and Encryption Type.
Rescan: Issue a rescan command to wireless NIC to update information on surrounding
wireless network.
PIN Code: 8-digit numbers for external Registrar or internal Registrar using PIN method. Each
NIC Wireless has only one Pin Code.
Table of Credentials: Display all of credentials got from the Registrar. List information’s
include SSID, MAC, Address, Authentication, and Encryption Type. Credentials are created as
soon as each WPS success and deleted as soon as PIN or PBC start.
Detail button: Information about security and key in the credential.
Connect button: Command to connect to the selected network inside credentials. The active
selected credential is as like as the active selected Profile.
Rotate button: Command to rotate to connect to the next network inside credentials.
Disconnect button: Step WPS action and disconnect this active link. And then select the last
profile at the Profile Page of Raconfig if exit. If there is an empty profile page, the driver will
select any non-security AP
Delete button: Delete an exit credential. And the select the next credential if exit. If there is an