User's Manual

33
empty credential, the driver will select and non-security AP.
PIN: Start to add to AP using PIN configuration Method.
PBC: Start to add to AP using PBC configuration Method.
PS: When you click PIN or PBC, please don’t do any rescan within 2-minute connection.
If you want to abort this setup within the interval, restart PIN/PBC or press Disconnect
to stop WPS action.
WPS associate IE: Send the association request with WPS IE during WPS setup. It is option
for STA.
3.7.1 To Add to AP using PIN Method
The user obtains a device password (PIN code) from the STA and enters the password into
the Registrar. Both the Enrollee and the Registrar use PIN Config method for the configuration
setup. The detail indicates as follows:
* Recommend you to do Disconnect and Delete first before each configuration setup.
Step1: Click “Rescan” to update available WPS APs.