User's Manual

62
Noise Level: Display the noise signal strength.
HT: Display current HT status in use, containing BW, GI, MCS, SNR0, and SNR1 value. (show
the information only for 802.11n wireless card.)
3.2.3 Site Survey
When you open the Configuration Utility, the system will scan all the channels to find all
the access points/stations within the accessible range of your adapter and automatically
connect to the wireless device with the highest signal strength. From the “Site Survey”, all the
network nearby will be listed. You can change the connection to another network or add one of
the networks to your own profile list.
SSID: Name of BBS of IBSS network.
BSSID: MAC address of AP or randomly generated of IBSS.
Signal: Receive signal strength of specified network.
Channel: Channel in use.
Encryption: Encryption algorithm used within than BBS or IBSS. Valid value includes WEP,
TKIP, AES, and Not Use.
Authentication: Authentication mode used within then network, including Unknown,