User's Manual

47
3.1.9 Link Status
Link Status displays the detail information current connection
Status: Current connection status. If no connection, it will show Disconnected. Otherwise, the
SSID and BSSID will show here.
Extra Info: Display link status in use.
Channel: Display current channel in use.
Authentication: Authentication mode in use.
Encryption: Encryption type in use.
Network Type: Network type in use.
IP Address: IP address about current connection.
Sub Mask: Sub Mast about current connection.
Default Gateway: Default gateway about current connection.
Link Speed: Show current transmit rate and receive rate.
Throughout: Display transmits and receive throughput in unit of Mbps.
Link Quality: Display Connection quality based on signal strength and Tx/Rx packet error
rate.
Signal Strength 1: Receive signal strength 1, user can choose to display as percentage or
dBm format.
Signal Strength 2: Receive signal strength 2, user can choose to display as percentage or
dBm format.
Signal Strength 3: Receive signal strength 3, user can choose to display as percentage or
dBm format.
Noise Strength: Display noise signal strength.
HT: Display current HT Status in use, containing BW, GI, MCS, SNR0, and SNR1 value.
(Show the information only for 802.11n wireless card)