User's Manual
26
signalreception),youcan select a lower outputpowerto saveenergy;fora distant access
point, you can select a higher output power. It’s suggested to select “Auto” to let setup
utilitydecidethebestoutputpowerforyou.
Preamble: Select the preamble for Ad hoc mode here. Available option
are “Auto” and
“Long”.
RTS Threshold: User can adjust the RTS threshold number by sliding the bar or key in the
valuedirectly.Thedefaultvalueis2347.
FragmentThreshold:User can adjust the Fragment threshold numberbyslidingthebaror
keyinthevaluedirectly.Thedefaultvalue
is2346.
Channel: Only available for setting under Ad‐Hoc mode. User can choose the channel
frequencytostarttheirAd‐Hocnetwork.
AuthenticationType:Thereare7typeofauthenticationmodessupportedbyRaUI.Theyare
Open,Shared,LEAP,WPA,WPA‐PSK,WPA2,WPA2‐PSK.
Encryption Type: For open and
shared authentication mode, the selection of encryption
type are None and WEP. For WPA, WPA2, WPA‐PSK and WPA2‐PSK authentication mode,
theencryptiontyp esupportsbothTKIPandAES.
802.1xSetting:ItisanauthenticationforWPAandWPA2certificatetoserver.
WPA Pre‐Shared Key: This is the
shared secret between AP and STA. For WPA‐PSK and
WPA2‐PSK authentication mode, this field must be filled with character longer than 8 and
lessthan32lengths.
WEPKey:OnlyvalidwhenusingWEPencryptionalgorithm.ThekeymustmatchedAP’skey.
Thereareseveralformatstoenterthe
keys:
ÎHexadecimal–40bits:10Hexcharacters
ÎHexadecimal–128bits:26Hexcharacters.
ÎASCII–40bits:5ASCIIcharacters
ÎASCII–128bits:13ASCIIcharacters
ShowPassword:Checkthisboxandallpassphrasesorsecuritykeysyouinputtedwillbe
displayedasyoutype,
butnotreplaceyourinputwithasterisk.
Use802.1x:Iftheaccesspointyouwishtoconnectrequires802.1xauthentication,please
clickon‘Use802.1x’box,thenclick‘802.1X’tabtoset802.1xparameters.
3.3.2ExampletoAddProfileinProfile
Step1:ClickAddinProfilefunction