User's Manual

30
(2) Ifuserwantstoconnecttoother AP,Hecanclick“Connect:buttonfortheintendedAP
tomakeconnection.
(3) If the intended network has encryption other than “Not Use”, RaUI will bring up the
securitypageappropriateinformationtomaketheconnection.
(4) Whenyoudouble‐clickon
theintendedAP,youcanseeAP’sdetailinformation.

3.5Advanced
Thiswirelessnetworkcardprovidesseveraladvancedsettingsforexperiencedwirelessusers.
You can change these settings to increase data transfer performance, or change operation
mode.

WirelessMode:Selectwirelessmode.Support2.4Gonly.
EnableTxBurst:Ralink’sproprietaryframeburstmode.
EnableTCPWindowsSize:Enhancethroughout.
FastRoamingat:Fasttoroaming,setupbytransmitpower.
Select your Country Region Code:The available channel differs from different countries.
For example: USA (FCC) is channel 1
‐11, Europe (ETSI) is channel 1‐13. The operating
frequencychannelwillberestrictedtothecountryuserlocatedbeforeimporting.Ifyouare
indifferentcountry,youhavetoadjust thechannelsettingtocomplytheregulationof the
country. Supporting  region code for this section has CH1‐11,
CH1‐13, CH10‐11, CH10‐13,
CH14, CH1‐14, CH3‐9, and CH5‐13. Please refer to be low Channel Classification and range,
CountryChannellisttoselectyourCountryRegionCode:

Figure1:ChannelClassificationandrange