User Manual

47
Link Status displays the detail information current connection
Status: Current connection status. If no connection, it will show Disconnected. Otherwise, the
SSID and BSSID will show here.
Extra Info: Display link status in use.
Channel: Display current channel in use.
Authentication: Authentication mode in use.
Encryption: Encryption type in use.
Network Type: Network type in use.
IP Address: IP address about current connection.
Sub Mask: Sub Mast about current connection.
Default Gateway: Default gateway about current connection.
Link Speed: Show current transmit rate and receive rate.
Throughout: Display transmits and receive throughput in unit of Mbps.
Link Quality: Display Connection quality based on signal strength and Tx/Rx packet error
rate.
Signal Strength 1: Receive signal strength 1, user can choose to display as percentage or
dBm format.
Signal Strength 2: Receive signal strength 2, user can choose to display as percentage or
dBm format.
Signal Strength 3: Receive signal strength 3, user can choose to display as percentage or
dBm format.
Noise Strength: Display noise signal strength.
HT: Display current HT Status in use, containing BW, GI, MCS, SNR0, and SNR1 value.
(Show the information only for 802.11n wireless card)
3.1.10 Enable AP Mode Feature in Windows 2000 OS