User's Manual

DNS 3: Fill in the IP address of Domain Name Server 3.

Clone MAC Address: Fill in the MAC address that is the MAC address to be cloned.

Enable uPNP: Click the checkbox to enable uPNP function.

Enable IGMP Proxy: Click the checkbox to enable IGMP Proxy.

Enable Ping Access on WAN: Click the checkbox to enable WAN ICMP response.

Enable Web Server Access on WAN: Click the checkbox to enable web

configuration from WAN side.

Enable IPsec pass through on VPN connection: Click the checkbox to enable

IPSec packet pass through.

Enable PPTP pass through on VPN connection: Click the checkbox to enable

PPTP packet pass through.

Enable L2TP pass through on VPN connection: Click the checkbox to enable

L2TP packet pass through.

Apply Changes: Click the

Apply Changes

button to complete the new

configuration setting.

Reset: Click the

Reset

button to abort change and recover the previous configuration

setting.

3.6 Firewall

3.6.1 Port Filtering

Entries in this table are used to restrict certain types of data packets from your local

network to Internet through the Gateway. Use of such filters can be helpful in securing or

restricting your local network.