User's Manual

28
(2) Choose your Time Zone: You can maintain the system time by synchronizing with a
public server over the Internet.
(3) Setup LAN Interface: This page is used to configure the parameters for local area network
which connects to the LAN port of your AP Router. Here you may change the setting for IP
address, subnet mask, DHCP, etc.
(4) Setup WAN Interface: This page is used to configure the parameters for Internet network
which connects to the WAN port of your AP Router. Here you may change the access method
to static IP, DHCP, PPPoE, PPTP, or L2TP by click the item value of WAN Access type.