User's Manual

3.3 Operation Mode

You can setup different modes to LAN and WLAN interface for NAT and bridging function.

Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem.

The NAT is enabled and PCs in LAN ports share the same IP to S|ISP through WAN port. The

connection type can be setup in WAN page by using PPPoE, DHCP client, PPTP client, L2TP

client or static IP.

Bridge: In this mode, all Ethernet ports and wireless interface are bridged together and NAT

function is disabled. All the WAN related function and firewall are not supported.

Wireless ISP: In this more, all Ethernet ports are bridged together and the wireless client will