User's Manual

43
How to setup your QoS:
1. In QoS Setup Section, Enable QoS feature.
2. Choose Uplink Speed: “Automatic” or “Manual”
3. Configure QoS Rules – Name, Priority (1~255, 1 is highest), Protocol, Local IP range,
Local Port Range, Remote IP Range, and Remote Port Range.
4. Click “Save Settings” to save QoS configurations.
3.7 Management
3.7.1 Status
This page shows the current status and some basic settings of the device, such as System
information, Wireless Configuration, TCP/IP Configuration, and WAN Configuration.