User's Manual

34
Wireless Access Control Mode: Click the Disabled, Allow Listed or Deny Listed
of drop down menu choose wireless access control mode. This is a security
control function; only those clients registered in the access control list can link
to this WLAN Broadband Router.
MAC Address: Fill in the MAC address of client to register this WLAN Broadband
Router access capability.
Comment: Fill in the comment tag for the registered client.
Current Access Control List: It shows the registered clients that are allowed to
link to this WLAN Broadband Router.
Delete Selected: Click to delete the selected clients that will be access right
removed from this WLAN Broadband Router.
Delete All: Click to delete all the registered clients from the access allowed list.
Reset: Click the Reset button to abort change and recover the previous
configuration setting.
3.4.5 WDS Setting
Wireless Distribution System uses wireless media to communicate with other
APs, like the Ethernet does. To do this, you must set these APs in the same
channel and set MAC address of other AP that you want to communicate
with in the table and then enable the WDS.